主頁(http://www.130131.com):LTE基礎:PDCCH盲檢測與DCI和RNTI關系
UE根據在子幀中檢測到的具有DCI格式1,1A,1B,1C,1D,2,2A或者UE擴展的DCI格式2B的PDCCH,使用上層定義的傳輸塊數目限制條件來解碼在同一子幀中相應的PDSCH。
UE可能設想定位參考信號不在根據用DCI格式1A或者1C的SI-RNTI或者P-RNTI做CRC擾碼的PDCCH解碼的PDSCH的資源塊中出現。
如果UE被高層設置解碼具有用SI-RNTI擾碼CRC的PDCCH時,UE將根據表7.1-1中定義的任意組合來解碼PDCCH和對應的PDSCH。對應于這些PDCCH的PDSCH用SI-RNTI來進行擾碼初始化。
盲檢測與DCI和RNTI關系如下多張表:
Table 7.1-1:PDCCH and PDSCH configured by SI-RNTI
|
DCI format
|
Search Space
|
Transmission scheme of PDSCH corresponding to PDCCH
|
|
DCI format 1C
|
Common
|
If the number of PBCH antenna ports is one, Single-antenna port, port 0 is used, otherwise Transmit diversity.
|
|
DCI format 1A
|
Common
|
If the number of PBCH antenna ports is one, Single-antenna port, port 0 is used, otherwise Transmit diversity
|
同樣道理:
Table 7.1-2:PDCCH and PDSCH configured by P-RNTI
|
DCI format
|
Search Space
|
Transmission scheme of PDSCH corresponding to PDCCH
|
|
DCI format 1C
|
Common
|
If the number of PBCH antenna ports is one, Single-antenna port, port 0 is used (see subclause 7.1.1), otherwise Transmit diversity
|
|
DCI format 1A
|
Common
|
If the number of PBCH antenna ports is one, Single-antenna port, port 0 is used (see subclause 7.1.1), otherwise Transmit diversity (see subclause 7.1.2)
|
Table 7.1-3:PDCCH and PDSCH configured by RA-RNTI
|
DCI format
|
Search Space
|
Transmission scheme of PDSCH corresponding to PDCCH
|
|
DCI format 1C
|
Common
|
If the number of PBCH antenna ports is one, Single-antenna port, port 0 is used (see subclause 7.1.1), otherwise Transmit diversity (see subclause 7.1.2)
|
|
DCI format 1A
|
Common
|
If the number of PBCH antenna ports is one, Single-antenna port, port 0 is used (see subclause 7.1.1), otherwise Transmit diversity (see subclause 7.1.2)
|
Table 7.1-5: PDCCH and PDSCHconfigured by C-RNTI
|
Transmission mode
|
DCI format
|
Search Space
|
Transmission scheme of PDSCH corresponding to PDCCH
|
|
Mode 1
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Single-antenna port, port 0 (see subclause7.1.1)
|
|
DCI format 1
|
UE specific by C-RNTI
|
Single-antenna port, port 0 (see subclause7.1.1)
|
|
Mode 2
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
DCI format 1
|
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
Mode 3
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
DCI format 2A
|
UE specific by C-RNTI
|
Large delay CDD (see subclause 7.1.3) orTransmit diversity (see subclause 7.1.2)
|
|
Mode 4
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
DCI format 2
|
UE specific by C-RNTI
|
Closed-loop spatial multiplexing (see subclause 7.1.4)or Transmit diversity (see subclause 7.1.2)
|
|
Mode 5
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
DCI format 1D
|
UE specific by C-RNTI
|
Multi-user MIMO (see subclause 7.1.5)
|
|
Mode 6
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
DCI format 1B
|
UE specific by C-RNTI
|
Closed-loop spatial multiplexing (see subclause 7.1.4) using a single transmission layer
|
|
Mode 7
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
If the number of PBCH antenna ports is one,Single-antenna port, port 0 is used (see subclause 7.1.1), otherwise Transmit diversity (see subclause 7.1.2)
|
|
DCI format 1
|
UE specific by C-RNTI
|
Single-antenna port; port 5 (see subclause 7.1.1)
|
|
Mode 8
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
If the number of PBCH antenna ports is one,Single-antenna port, port 0 is used (see subclause 7.1.1), otherwise Transmit diversity (see subclause 7.1.2)
|
|
DCI format 2B
|
UE specific by C-RNTI
|
Dual layer transmission; port 7 and 8 (see subclause 7.1.5A) or single-antenna port; port 7 or 8 (see subclause 7.1.1)
|
Table 7.1-6: PDCCH and PDSCHconfigured by SPS C-RNTI
|
Transmission mode
|
DCI format
|
Search Space
|
Transmission scheme of PDSCH corresponding to PDCCH
|
|
Mode 1
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Single-antenna port, port 0 (see subclause 7.1.1)
|
|
DCI format 1
|
UE specific by C-RNTI
|
Single-antenna port, port 0 (see subclause 7.1.1)
|
|
Mode 2
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
DCI format 1
|
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
Mode 3
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
DCI format 2A
|
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
Mode 4
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
DCI format 2
|
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
Mode 5
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
Mode 6
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Transmit diversity (see subclause 7.1.2)
|
|
Mode 7
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Single-antenna port; port 5 (see subclause 7.1.1)
|
|
DCI format 1
|
UE specific by C-RNTI
|
Single-antenna port; port 5 (see subclause 7.1.1)
|
|
Mode 8
|
DCI format 1A
|
Common and
UE specific by C-RNTI
|
Single-antenna port; port 7(see subclause 7.1.1)
|
|
DCI format 2B
|
UE specific by C-RNTI
|
Single-antenna port; port 7 or 8 (see subclause 7.1.1)
|
Table 7.1-7: PDCCH and PDSCHconfigured by Temporary C-RNTI
|
DCI format
|
Search Space
|
Transmission scheme of PDSCH corresponding to PDCCH
|
|
DCI format 1A
|
Common and UE specific by Temporary C-RNTI
|
If the number of PBCH antenna port is one, Single-antenna port, port 0 is used (see subclause 7.1.1), otherwise Transmit diversity (see subclause 7.1.2)
|
|
DCI format 1
|
UE specific by Temporary C-RNTI
|
If the number of PBCH antenna port is one, Single-antenna port, port 0 is used (see subclause 7.1.1), otherwise Transmit diversity (see subclause 7.1.2)
|
(中國集群通信網 | 責任編輯:陳曉亮) |